Summary of the content on the page No. 1
HP T750 G2, HP T750J, HP T1000 G3,
HP T1000J, HP T1500 G3, and
HP T1500J UPS Models
User Guide
Part Number 505922-002
July 2009 (Second Edition)
Hp T1500 G3 Ups Specs
HP Qualified Options strengthen the foundation of your data center with high caliber products that are easy to maintain and tailored for ProLiant, Integrity and StorageWorks giving you confidence in your whole infrastructure. Introducing the next generation of HP Tower UPS, T750 G2, T1000 G3, T1500 G3. Tower UPS features include: Performance. HPE T750 G4 UPS, T1000 G4 UPS, and T1500 G4 UPS User Guide Part Number: 792523-001Ra. Hewlett Packard Enterprise assumes you are qualified in the servicing of high-voltage. The Tower UPS models that are covered in this manual are intended for installation in an environment.
Summary of the content on the page No. 2
© Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Audience assumptions This guide is for the person who operates,
Summary of the content on the page No. 3
0002Special Symbols The following are examples of symbols used on the UPS to alert you to important information: RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of electric shock symbol. CAUTION: REFER TO OPERATOR'S MANUAL - Refer to your operator's manual for additional information, such as important operating and maintenance instructions. RJ-45 RECEPTACLE - For 230V units only: This receptacle provides network interface connections. Do not plug telephone or telecommunicati
Summary of the content on the page No. 4
Ups User Employee
0002Regulatory compliance notices Regulatory compliance identification numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique regulatory model number. The regulatory model number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to this regulatory model number. The regulatory model number is not the marketing
Summary of the content on the page No. 5
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth). This marking is valid for EU non-harmonized Telecom products. *Notified body number (used only if applicable—refer to the product label) Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of
Summary of the content on the page No. 6
Grounding methods to prevent electrostatic discharge Several methods are used for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts: 0002 Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm +10 percent resistance in the ground cords. To provide proper ground, wear the strap snug against the skin. 0002 Use heel straps, toe straps, or boot straps
Java sun manual download. View & download of more than 77 Lifesmart PDF user manuals, service manuals, operating guides. Heater user manuals, operating guides & specifications.
Summary of the content on the page No. 7
0002Table of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 0002Inspecting the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 8
0002Chapter 1 Introduction The HP T750 G2, HP T750J, HP T1000 G3, HP T1000J, HP T1500 G3, and HP T1500J Uninterruptible Power System (UPS) models protect your sensitive electronic equipment from basic power problems such as power failures, power sags, power surges, brownouts, and line noise. Power outages can occur when you least expect them, and power quality can be erratic. These power problems have the potential to corrupt critical data, destroy unsaved work sessions, and damage hardware — causi
Summary of the content on the page No. 9
INTRODUCTION Providing outstanding performance and reliability, the UPS's unique benefits include: 0002 Buck and Boost voltage regulation that ensures consistent voltage to your load by correcting voltage fluctuations. 0002 Advanced battery management to increase battery service life, optimize recharge time, and provide a warning before the end of useful battery life. 0002 Start‐on‐battery capability for powering up the UPS even if utility power is not available. 0002 Hot‐swappable batteries that simplify m
Summary of the content on the page No. 10
0002Chapter 2 Safety Warnings IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions that you should follow during installation and maintenance of the UPS and batteries. Please read all instructions before operating the equipment and save this manual for future reference. D A N G E R This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS. W A R
Summary of the content on the page No. 11
0002Chapter 3 Installation This section explains: 0002 Equipment inspection 0002 UPS internal battery connection 0002 UPS installation 0002 UPS rear panels 0002Inspecting the Equipment If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier or place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file a claim for concealed damage. To file a claim for shipping damage or concealed damage: 1) File with the carrier
Summary of the content on the page No. 12
INSTALLATION 3 Slide up and remove the metal battery cover (see Figure 3). Do not remove any screws. NOTE: For HP T750 G2, HP T750J, and HP T1000 G3 models, carefully remove the metal battery cover to avoid damaging the battery disconnect blades. HP T750 G2 HP T1000J HP T1500 G3, and HP T750J, and HP T1500J HP T1000 G3 Figure 3 Removing the Battery Cover 4 Remove the protective label from the internal battery connector (see Figure 4). Figure 4 Removing the Protective Label 5 Connect the red
Summary of the content on the page No. 13
INSTALLATION 0002Installing the UPS NOTE: Do not make unauthorized changes to the UPS or accessories; otherwise, damage may occur to your equipment and void your warranty. To install the UPS: 1 Verify that the DIP switch is set to the correct output voltage and input voltage range (see Table 1 on page 14). 2 If you plan to use HP Power Manager software, first connect your computer to the USB port or UPS serial port using the supplied cable. For more information about communication options, see pag
Summary of the content on the page No. 14
INSTALLATION 0002UPS Rear Panels This section shows the UPS rear panels. DIP Switches USB Port Serial Port Site Wiring Fault Network Transient Indicator Protector Fan Four 5‐15 Receptacles Input Overcurrent Protector 6-ft Power Cord with 5‐15 Plug Figure 7 HP T750 G2 120V Rear Panel DIP Switches USB Port Serial Port Site Wiring Fault Network Transient Indicator Protector Two 5‐15 Receptacles Fan Four 5‐15 Receptacles Input Overcurrent Protector 6-ft Power Cord with 5‐15 Plug Figure 8 HP T750J 100
Summary of the content on the page No. 15
INSTALLATION DIP Switches USB Port Serial Port Site Wiring Fault Network Transient Indicator Protector Fan Six 5‐15 Receptacles Input Overcurrent Protector 6-ft Power Cord with 5‐15 Plug Figure 9 HP T1000J 100V, HP T1500J 100V, and HP T1500 G3 120V Rear Panel DIP Switches USB Port Serial Port Network Transient Protector Four 10A, IEC-320 Fan Receptacles 10A, IEC-320 Input Connector Figure 10 HP T750 G2, 230V Rear Panel DIP Switches USB Port Serial Port Network Transient Protector Four 10A, IEC
4 of 4 Top Solutions for Galaxy J3 Achieve (Sprint) see more solutions. On the phone, navigate to Settings, and then search for. Product info. Manual, downloads, specs and register Galaxy J3 Achieve (Sprint). Take advantage of Remote Support for mobile phones, tablets and TVs. Get mobile support. Have questions. Samsung Galaxy J3 (2018) Manual / User Guide This is the official Samsung Galaxy J3 (2018) User Guide in English provided from the manufacturer. If you are looking for detailed technical specifications, please see our Specs page. L: Proximity sensor – Turns off the screen and disables touch functionality during a call when the device is in close proximity to the body. – Turns the screen back on and enables touch. User guide manual for j3 achieve cell phone.
Summary of the content on the page No. 16
INSTALLATION DIP Switches USB Port Serial Port Network Transient Protector Fan Six 10A, IEC-320 Receptacles 10A, IEC-320 Input Connector Figure 12 HP T1500 G3, 230V Rear Panel 9 HP T750 G2, HP T750J, HP T1000 G3, HP T1000J, HP T1500 G3, and HP T1500J UPS Models User Guide 0002 505922-002
Summary of the content on the page No. 17
0002Chapter 4 Operation This section describes: 0002 Turning the UPS on and off 0002 Starting the UPS on battery 0002 Standby mode 0002 The UPS front panel and indicators 0002 Initiating the self‐test 0002Turning the UPS On After the UPS is connected to a power outlet, the UPS enters Standby mode. To turn on the UPS, press and hold the (On/Off) button until you hear the UPS beep. After the UPS is turned on, it conducts a self‐test and enters Normal mode. The 0002 (Power On) indicator illuminates green indicating that
Summary of the content on the page No. 18
OPERATION 0002Turning the UPS Off NOTE: Pressing the (On/Off) button while the UPS is in Battery mode causes the UPS to shut down immediately. To turn off the UPS: 1 Shut down the equipment connected to the UPS. 2 Press and hold the (On/Off) button for two seconds. The UPS transfers to Standby mode (if utility power is available) and removes power from your equipment. 3 Unplug the UPS from the power outlet. If you do not unplug the UPS, it remains in Standby mode. 0002Standby Mode When the UPS is t
Summary of the content on the page No. 19
OPERATION 0002Initiating the Self‐Test NOTE: The batteries must be fully charged and the UPS must not be in Battery mode to perform the self‐test. Press and hold the (Test/Alarm Reset) button for three seconds to initiate the self‐test. During the five-second test, the bar graph indicators cycle through twice. If the UPS beeps or a UPS alarm indicator stays on, see “Troubleshooting” on page 27. 12 HP T750 G2, HP T750J, HP T1000 G3, HP T1000J, HP T1500 G3, and HP T1500J UPS Models User Guide 0002 5
Capture NX 2 provide you with a new intuitive approach to the art and science of image editing that saves you valuable time and effort. Capture NX 2 is the latest version in a long line of quality tools from Nikon designed to speed up workflow for photographers. Page 12: Camera Relationship. Capture˜NX enc ual 2 Introduction Vie ictures Filters djustment O eatures Menu Guide What Capture NX-D Can Do for You Capture NX-D lets you fine-tune pictures by, for example, adjusting brightness and hue, and can also be used to edit RAW images taken with Nikon digital cam-eras and save them in other formats. Fine-Tune Pictures. Capture nx 2 download.
Summary of the content on the page No. 20
0002Chapter 5 Additional UPS Features This section describes: 0002 Voltage configuration 0002 USB port and serial port 0002 Network transient protector 0002 HP Power Manager software 0002Voltage Configuration The DIP switches on the rear panel of each unit (see Figure 14) are used to configure the output voltage and input voltage range. To configure voltage: 1 The UPS must be completely shutdown. To turn off the UPS, press and hold the (On/Off) button for two seconds and then unplug the UPS from the power outlet
HP UPS T1000/1500
User Guide
April 2006 (First Edition)
Part Number 404317-001a
Download 1 Ascot Weather Station PDF manuals. User manuals, Ascot Weather station Operating guides and Service manuals. Ascot weather station w210 manual. Ascot Radio Controlled Weather Station Bedienungsanleitung. I bought in Aldi Basel many years ago an ASCO radio-controlled weather station type W210. It was working fine in Basel. Now I moved to Spain, and the remote sensor shows LL instead of the outdoor temperature. How to fix it?Thanks and regards,Maria Rosa. Mar 15, 2018 Ascot Weather Station. I had a look at the manual and identified that the low. My ascot radio controlled weather station no longer shows the outside temp on. Apr 05, 2012. Our full line of cabled and wireless weather stations and wireless thermometers provide a wealth of information about the weather just beyond your door.
- Component identification
- Installation
- Connecting the host computer
- UPS operations
- Silencing an audible alarm
- Power management
- Maintenance
- Replacing the batteries
- Troubleshooting
- Specifications
- Spares
- Technical support
- Warranty information
- Regulatory compliance notices
- Federal Communications Commission notice
- Electrostatic discharge
